i-trac heavy duty surfacing
I-Trac is a state-of-the-art heavy-duty access system that features excellent turf protection and enables vehicle and equipment traffic over otherwise impassable or unsafe ground. I-Trac is a composite interlocking panel system that creates a contiguous surface capable of dealing with all road going vehicles and extreme static loadings.
I-Trac is a state-of-the-art single component heavy-duty access system that features excellent turf protection and enables vehicular traffic over inhospitable or unsafe ground. I-Trac is a composite interlocking panel system that creates a NON-JOINTED surface. This is important because there are no four-corner weak points in an assembled roadway or pad. There is also no pivoting joints that can cause rutting under vehicle traffic.
The I-Trac panel consists of two molded pieces that are welded together at the low-stress midpoint. It is not only molded around the outside - it is molded throughout. Hundreds of ribs within one panel are heat welded together. They melt together to make a solid panel with hundreds of pockets that are all individually welded together. Why does this matter? Because punctures happen. With I-Trac a simple puncture to the surface will allow water or debris into a 2" x 3" pocket.
All vulnerable parts including cams and joint pins are replaceable. Combine this with the amazing panel and you have an extremely low cost of operation.
I-Trac is capable of dealing with all road going vehicles and extreme static loadings. This extraordinary system is ideal for these applications:
Panel Size (in):
47.5 (L) x 36.3 (W) x 2.1 (H)
Weight Per Panel (lbs): 38 or 4.4 lbs per square foot
Area Per Panel (sq ft/pc): 8.6
Shipping (sq ft):
Trailer 53': 9,804 square feet
Trailer 48': 9,150 square feet
Flatbed 48': 9,804 square feet
Static Compression Capacity
(lbs/sq ft): 86,400*
*Solid sub-surface. Capacity varies depending on sub-surface